Skip to main content
Odin kiosks are iPad-based stations where workers clock in and out of your jobsite. This page covers how to relocate a kiosk and troubleshoot common connectivity issues.

​
Relocate a kiosk

1

Disconnect the kiosk

Unplug the kiosk, remove the mount from the wall, and use the enclosure key to extract the iPad.
2

Set up the new location

Choose a mounting spot with access to power and enough space for workers to scan badges. Secure the mount to the wall and place the iPad in the case.Contact your Odin CSM to update the camera orientation if needed.
3

Configure the iPad

Launch the Odin app, log in with Jobsite Admin credentials, and tap the Kiosk icon. Select the jobsite and confirm the kiosk is active in Kiosk Mode.
4

Reconnect and secure

Reconnect power and store the enclosure key in a secure location.
If the jobsite does not appear in the list, contact Odin support to verify the user has the Jobsite Admin role.

​
Battery saver mode

When a kiosk runs on battery, it automatically reduces screen brightness during periods of inactivity to conserve power. The screen returns to normal brightness when someone interacts with the kiosk or when the device is plugged back in.

​
Troubleshoot connectivity

If the kiosk is unresponsive or workers are unable to clock in, check the following:
  1. Power — verify the kiosk is plugged in and the iPad is turned on.
  2. Network — confirm the iPad is connected to WiFi or has a cellular signal. Open the iPad Settings app to check the connection status.
  3. Geofencing — clock-in requires geofencing to be enabled. If workers see a location error, confirm that location services are turned on for the Odin app.
If the issue persists after checking these, contact Odin support for further assistance.